Troubleshooting Steps For iX Server Not Booting Issue

Server display not coming or Server not booting issue

Issue: No Display - Server Not Booting
Cause: Motherboard Faulty
Solution: Replace Motherboard
Note: For detailed troubleshooting steps please go through the document attached.
    • Related Articles

    • Server is getting Auto Shutdown

      If the server gets auto shutdown frequently , then might be issue with the Server temperature[High].Kindly check the Server Environment Cooling System availability. Also ensure that the server fan air circulations are proper. Finally we have to apply ...
    • Server Health Status showing Amber

      If you see the Amber LED in the Server from indication portion,There might be the issue with Power Supply failure.Please check rear side of the server to check the Power supply status and replaced the faulty power Supply which shows the amber status.
    • HP Proliant Server DL 380 Gen9 - Smart Array controller failed

      Hi, If the Smart array controller gets failed or not responding , Please follow below options: 1.Power down the server and wait for 20 sec and power on. 2.Login to ILO and check the logs. 3.Try to update the firmware using HP Service pack - Latest ...
    • Server HDD shows Amber LED and not accessible

      If the Server HDD shows Amber LED and it is not accessible from the OS means the HDD would have failed or the HDD would have left out from the Raid array. Please reinsert the HDD and wait for Rebuild , even after a particular time also showing the ...
    • I have a supermicro server, that stops at boot, with the message SYSTEM INITIALIZING with BA code at the right.

      Most of the time, the “BA” postcode is memory-related. You can check with just 2 memory modules in slot 1A and the first memory slot on the second CPU. When your issue is gone in this setup, you can add memory 1 by 1 then you can check which DIMM ...