Server Health Status showing Amber

Server Health Status showing Amber

If you see the Amber LED in the Server from indication portion,There might be the issue with Power Supply failure.Please check rear side of the server to check the Power supply status and replaced the faulty power Supply which shows the amber status.
    • Related Articles

    • Server HDD shows Amber LED and not accessible

      If the Server HDD shows Amber LED and it is not accessible from the OS means the HDD would have failed or the HDD would have left out from the Raid array. Please reinsert the HDD and wait for Rebuild , even after a particular time also showing the ...
    • HP Proliant Server DL 380 Gen9 - Smart Array controller failed

      Hi, If the Smart array controller gets failed or not responding , Please follow below options: 1.Power down the server and wait for 20 sec and power on. 2.Login to ILO and check the logs. 3.Try to update the firmware using HP Service pack - Latest ...
    • Server is getting Auto Shutdown

      If the server gets auto shutdown frequently , then might be issue with the Server temperature[High].Kindly check the Server Environment Cooling System availability. Also ensure that the server fan air circulations are proper. Finally we have to apply ...
    • Server display not coming or Server not booting issue

      Issue: No Display - Server Not Booting Cause: Motherboard Faulty Solution: Replace Motherboard Note: For detailed troubleshooting steps please go through the document attached.
    • NIC Port not getting UP

      Check with different Patch cable and see the response from the Server. If the port is not coming up , restart the server and go to bios page and check the NIC port status. If still the port is showing down, Please check with another NIC card .